.png)
Are you looking to add some style to a room with a lot of built-ins? Hanging wallpaper can be a great way to update the space and make it feel fresh and new. But if you're not sure how to hang wallpaper on a wall with a lot of built-ins, don't worry! Here are some expert tips from Apex Roofing and Construction in Maryland to help you get the job done.
Measure the Space: Before you start hanging wallpaper, measure the walls and built-ins to ensure you have enough wallpaper to complete the job. Be sure to add an extra few inches to your measurements to account for any cuts or trimming.
Prep the Walls: Clean the walls and built-ins to remove any dirt, dust, or grease that could prevent the wallpaper from sticking properly. Make any necessary repairs to the walls and fill any gaps or cracks to ensure a smooth surface for the wallpaper.
Cut the Wallpaper: Cut the wallpaper to fit around the built-ins, such as shelves, cabinets, or molding. To avoid waste, measure each section carefully and cut the wallpaper accordingly.
Apply Adhesive: Apply wallpaper adhesive to the back of the wallpaper using a wallpaper brush or roller. Make sure to spread the adhesive evenly to ensure proper adhesion.
Hang the Wallpaper: Start by hanging the wallpaper on the wall, working your way around the built-ins. Use a wallpaper smoothing tool to remove any bubbles or wrinkles and to ensure the wallpaper is smooth and properly adhered.
Trim the Edges: Once the wallpaper is hung, use a sharp blade to trim the edges around the built-ins. Be careful not to damage the wallpaper or the built-ins while cutting.
By following these tips, you can hang wallpaper on a wall with built-ins with ease and achieve a professional-looking result. And if you're still unsure about the process, the team at Apex Roofing and Construction in Maryland is always here to help. With years of experience in home improvement and construction, they can provide you with expert advice and guidance.